Headboard tutorials

The headboard of your dreams, made with your own hands

A big result, worked flat: start with the simple panel, then vote for the next one.

Upholstered headboard

Guide 3 · Headboards · A big result, worked flat

●○○○○

In short: an upholstered headboard is a plywood panel padded with foam and wadding, then covered in fabric stapled on the back. It’s one of the best first projects in upholstery: no frame to strip, no springs, just a few essential techniques and a result that transforms a bedroom.

This page gathers all my headboard tutorials. Start with the simple panel, then vote for the next one.

Go straight to the tutorial: simple panel headboard

Upholstered panel headboard with clean, sharp corners, made in a French upholstery workshop

Headboard tutorials · Start here

The simple panel headboard

●○○○○

Beginner · Modern technique (foam) · No sewing

Foam, wadding, fabric on the straight grain, even stapling and sharp corners: every gesture shown step by step in photos, often with video, in the full tutorial.

You decide

Which headboard would you like to learn next?

The simple panel is just the beginning. Tell me in the comments below which one you’d like first, or suggest your own: the most requested will be the next tutorial.

Classic

Buttoned headboard

Buttons planned and drilled into the panel from the start.

Graphic

Channel headboard

The modern take on buttoning: vertical or horizontal padded channels, made with the back tacking technique.

Tailored

Piped or boxed headboard

A border and piping that give depth and a tailored finish.

Sculptural

Shaped headboard

A curved, arched or scalloped outline.

Practical

Removable cover

A sewn cover you can take off and wash.

Enveloping

Winged headboard

Side wings that wrap around the bed.

Vote in the comments →

Why make your own

Why make your own upholstered headboard?

Velvet upholstery fabric detail

You choose everything

Your size, your softness, your fabric

The exact width of your bed, the height that suits your room, the softness of the padding and, above all, the fabric. A headboard is often the first thing you see in a bedroom: a beautiful fabric there makes all the difference.

Hand position and tool angle at the upholstery workbench

The ideal first project

The gestures of every chair, worked flat

Gluing foam, laying wadding, placing fabric on the straight grain, temporary tacking, stapling with an even tension and folding clean corners: everything you’ll reuse afterwards.

What you need

Tools and materials for a headboard

A panel, foam, wadding, fabric and a staple gun: the exact list and quantities are in each tutorial.

Upholstery tools and materials laid out on the workbench

Tools

Which tools, and which to buy first

Staple gun, tack hammer, foam saw, upholstery scissors: what each one does.

The complete guide to upholstery tools →

Materials

Foam, wadding and fabric, chosen right

Which foam, which wadding weight, which upholstery fabric, and why.

The complete guide to upholstery materials →

An upholstery step in progress on the workbench

Premium Membership · Your headboard, together

Not sure your corners are sharp enough? Show me

With the Premium Membership, you send me a photo or a short video of your headboard on WhatsApp, and I answer you personally, as if you were at my workbench.

  • Check your fabric placement before you staple
  • Get your tension and your corners validated
  • Advice on your own headboard, not a generic answer

Upholstered headboard FAQ

Can a beginner make an upholstered headboard?

Yes. The simple panel is one of the easiest upholstery projects there is, and a perfect first step before a chair. If you’re completely new to upholstery, start with Guide 1: upholstery tutorials for beginners.

What size should an upholstered headboard be?

At least 5 cm (2 in) wider than the mattress on each side: a headboard narrower than the bed always looks wrong. The simple panel tutorial gives the full size chart.

Can I add buttons to my headboard later?

Not really: buttons have to be planned from the start. Their holes are drilled in the bare panel, before the foam goes on. If you want buttons, decide before you begin.

How do you finish the edges of a headboard?

First choice: with or without a border. Without a border, as on the simple panel, the fabric wraps around the edge of the board and is stapled on the back: the easiest finish, with a soft, rounded outline. With a border, a separate strip of fabric covers the edge, often with piping between the front and the border: more depth and a sharper, more tailored look. Then, as an option, add a row of decorative nails or a braid along the edge.

What is a channel headboard?

A headboard upholstered in padded bands, vertical or horizontal, instead of one continuous surface: a modern version of buttoning, cleaner and more graphic. Each channel is padded on its own, and the joins are kept tight with the back tacking technique. It works especially well with plain fabrics. A channel headboard tutorial is in the list of headboards coming next: vote for it in the comments.

What fabric should I choose for a headboard?

Any upholstery-weight fabric works. Since a headboard is rarely rubbed like a seat, you can choose more delicate fabrics than for a chair: velvet, linen, a large pattern. See the upholstery fabric guide.

After your headboard

Where to go next

Reupholstered stool

More full projects

Every piece, from stool to club chair

All the headboard tutorials sit alongside every other project in Guide 3: full upholstery projects.

Reupholstered simple chair

The whole craft

Ready for a chair?

To learn everything, follow the complete guide on how to reupholster a chair.

Written by Céline Vanier, running her own upholstery atelier by Lake Annecy for more than 15 years.

The Hammer Club

Ready to make your headboard?

Learning upholstery online with The Girl With A Hammer

Online, at your pace

Every tutorial on this page, in full

Step-by-step photo tutorials, many with video. 90+ tutorials and a clear learning path, from €9.99/month.

Upholstery class at the atelier by Lake Annecy

In person, by Lake Annecy

Come do this at my atelier

Make your piece at my workbench, with my hands next to yours, during a summer course in Annecy.